"4x4" Rallye Rear Rack Kit for the Ascent-18 Scout II

Outfit your Redcat Ascent-18 Scout II for the trail with this 3D-printed "4x4" Rallye Faux Spare Tire Cover/Carrier and Rear Tailgate Panel Kit. Printed in PLA filament, this multi-piece accessory gives your rig an adventure-ready, overland feel while still letting you crawl over trail obstacles.

The rear tailgate panel features the ribbed design found on the International Scout II Rallye package.

Each kit includes:

This product is printed on demand and may take up to 5 days to ship after you place your order.

"Beefy Rack" Bed Rack Basket for the SCX24 Jeep Gladiator

Extreme small-scale crawling adventures call for extreme scale gear. The "Beefy Rack" Bed Rack Basket adds a cargo rack to the back of your SCX24 Jeep JT Gladiator using a sleek mounting method.

Each "Beefy Rack" is 3D-printed in PLA installs using the stock SCX24 Jeep Gladiator Bed Rack hardware. Simply remove the stock bed rack crossbars (and overland tent scale accessory) and insert the "Beefy Rack" Bed Rack Basket in its place.

This product is printed on demand and may take up to 5 days to ship after the order has been placed.

"Beefy Ribs" Bed Rack Braces for the SCX24 Jeep Gladiator

If you're planning to take your Axial SCX24 Jeep JT Gladiator on extreme small-scale adventures, make sure your rig is up for the challenge. These "Beefy Ribs" Bed Rack Braces are wider and thicker than the stock bed rack braces and will look great while paired with your favorite scale accessories.

Each pack of "Beefy Ribs" includes two 3D-printed (PLA) braces that are ready for installation. To install them onto your SCX24 Jeep JT Gladiator, simply remove the stock bed rack braces (and overland tent accessory) and insert the "Beefy Ribs" using the stock hardware.

This product is printed on demand and may take up to 5 days to ship after the order has been placed.

"Beefy Slab" Bed Rack Slab for the SCX24 Jeep Gladiator

Extreme small-scale crawling adventures call for extreme scale gear. If you want to outfit your SCX24 Jeep Gladiator with a rear cargo rack but want something sleek, say hello to the "Beefy Slab" Bed Rack Slab.

Each "Beefy Slab" is 3D-printed in PLA installs using the stock SCX24 Jeep Gladiator Bed Rack hardware. Simply remove the stock bed rack crossbars (and overland tent scale accessory) and insert the "Beefy Slab" Bed Rack Slab in its place.

This product is printed on demand and may take up to 5 days to ship after the order has been placed.

"Slanted" Double-Decker Display Stand for the SCX30

If your collection of SCX30s is getting out of control, gain some control over the chaos with this two-tier display stand. 3D-printed in PLA, this display stand will accommodate up to two Axial SCX30 micro crawlers. To support the angled center skid plate of the SCX30, each display stand support is lower on the left side, allowing your SCX30 to sit visually level or near-level.

Whether you run performance or comp-style rigs or prefer to deck out your machines with scale accessories, the first layer has plenty of room to support models with roof racks.

This display stand is designed specifically for the Axial SCX30.

This product is printed on demand and may take up to 5 days to ship after the order has been placed.

1/24 "4x4" 3D-Printed Faux Spare Tire Cover

Change up the appearance of your Axial SCX24 Ford Bronco Hardbody with this 3D-printed 4x4 Rear Tire "Cover". While this won't fit over the spare tire that's included with the SCX24 2021 Ford Bronco, you can swap out the spare tire with this 3D-printed accessory.

Measuring 45mm wide, this Rear Tire "Cover" scale accessory is 10% smaller than our original design. Still scale in appearance, this scaled-down item lets you see a bit more of your Bronco's backside.

The cover mounts to the spare tire holder of the SCX24 Bronco body using the stock spare tire mounting screw. Created from PLA, this rear tire cover accessory features indented "4x4" text and offers a stylish way to customize the appearance of your 1/24-scale trail machine.

4x4 3D-Printed Rear Tire "Cover" Specs:

This product is printed on demand and may take up to 5 days to ship after you place your order.

1/30 "4x4" Faux Spare Tire Cover for the Axial SCX30

Give your Axial SCX30 Jeep Wrangler or Ford Bronco a refresh with this 3D-printed Faux Rear Tire Cover. Printed in PLA, this scale accessory mounts to the SCX30's existing spare tire mount with an 8mm-long screw.

The tire cover accessory features a stylized "4x4" graphic embossed at the center and is available in single- or two-color print.

This product is printed on demand and may take up to 5 days to ship after the order has been placed.

45mm Wild Horse 3D-Printed Rear Tire "Cover"

Change up the appearance of your Axial SCX24 Ford Bronco Hardbody with this 3D-printed Wild Horse Rear Tire "Cover". While this won't fit over the spare tire that's included with the SCX24 2021 Ford Bronco, you can swap out the spare tire with this 3D-printed accessory.

Measuring 45mm wide, this Rear Tire "Cover" scale accessory is 10% smaller than our original design. Still scale in appearance, this scaled-down item lets you see a bit more of your Bronco's backside.

The cover mounts to the spare tire holder of the SCX24 Bronco body using the stock spare tire mounting screw. Created from PLA, this rear tire cover accessory features an indented "Wild Horse" and offers a stylish way to customize the appearance of your 1/24-scale trail machine.

Wild Horse 3D-Printed Rear Tire "Cover" Specs:

This product is printed on demand and may take up to 5 days to ship after the order has been placed.

Double-Decker Display Stand for 1/24 & 1/18 R/C Crawlers

If your collection of 1/18-scale R/C crawlers is getting out of control, get some control over the chaos with this two-tier display stand. 3D-printed in black PLA, this display stand will accommodate up to two 1/18-scale R/C crawlers. Whether you run performance, comp-style rigs, or you prefer to deck out your machines with scale accessories, the first layer has plenty of room to support models with roof racks.

This display stand is designed to work with 4-wheeled, 1/24 and 1/18-scale vehicles with a wheelbase of 132mm or longer, like the Axial SCX24, FMS FCX24M, Traxxas TRX-4M, and Redcat Ascent-18.

This product is printed on demand and may take up to 5 days to ship after the order has been placed.

Double-Decker Display Stand for 1/30 & 1/32 R/C Crawlers

If your collection of micro R/C crawlers is getting out of control, get some control over the chaos with this two-tier display stand. 3D-printed in black PLA, this display stand will accommodate up to two 1/30 or 1/32-scale R/C crawlers. Whether you run performance or comp-style rigs or prefer to deck out your machines with scale accessories, the first layer has plenty of room to support models with roof racks.

This display stand is designed to work with 4-wheeled, 1/30 and 1/32-scale vehicles like the Axial SCX30 and Redcat Ascent-32..

This product is printed on demand and may take up to 5 days to ship after the order has been placed.

Set of Four Redcat 1.0" Pre-Mounted Interco Super Swamper Tires w/ Black Wheels (Used)

These are take-offs from a Redcat Ascent-18 Scout II Brushless 1/18-scale crawler. There are some light scuffs on the wheel face, mainly from where the wheel nut was tightened from the factory. The tires have great grip and plenty of life left in them.

Set of Four Redcat 1.0" Pre-Mounted Interco Super Swamper Tires w/ Black Wheels (Used)

These are take-offs from a Redcat Ascent-18 Scout II Brushless 1/18-scale crawler. There are some light scuffs on the wheel face, mainly from where the wheel nut was tightened from the factory. The tires have great grip and plenty of life left in them.

The "Overlander Deluxe" 3D-printed Magnet Mount Roof Rack for the Ascent-18 Scout II

Give your Redcat Ascent-18 Scout II a classic, weekend-warrior appearance with this "deluxe overlander" two-tier magnetic-mount roof rack. Designed for easy installation and removal, this 3D-printed roof rack attaches to the Ascent-18 Scout II's roof using four 60x10x3 Neodymium magnets.

This roof rack and its inner magnet mount are 3D-printed in matte black PLA, and you can choose from tan, gray, or black slats for the raised rear section.

When you want to add scale detail and accessories to your rig, simply attach the roof rack and inner magnet support to the roof of your Scout II. If you feel the urge to change up the appearance or performance of your crawler, simply pull the roof rack and support brace off, and you've got a clean slate to work with once again.

The magnet mount is strong and should withstand basic trail action and rollovers.

Two versions of this roof rack are available, one with magnets included and one without.

This product is printed on demand and may take up to 5 days to ship after you place your order.

The "Overlander" 3D-printed Magnet Mount Roof Rack for the Ascent-18 Scout II

Trick out our Redcat Ascent-18 Scout II with this "overland-style", magnetic-mount roof rack. Designed for easy installation and removal, this 3D-printed roof rack attaches to the Ascent-18 Scout II's roof using four 60x10x3 Neodymium magnets.

This roof rack and its inner magnet mount are 3D-printed in matte black PLA.

When you want to add scale detail and accessories to your rig, simply attach the roof rack and inner magnet support to the roof of your Scout II. If you feel the urge to change up the appearance or performance of your crawler, simply pull the roof rack and support brace off, and you've got a clean slate to work with once again.

The magnet mount is strong and should withstand basic trail action and rollovers.

Two versions of this roof rack are available, one with magnets included and one without.

This product is printed on demand and may take up to 5 days to ship after you place your order.

The "Slab" 3D-printed Magnet Mount Roof Rack for the Ascent-18 Scout II

Trick out our Redcat Ascent-18 Scout II with this "slab", magnetic-mount roof rack. Designed for easy installation and removal, this 3D-printed roof rack slab attaches to the Ascent-18 Scout II's roof using four 60x10x3 Neodymium magnets.

This roof rack and its inner magnet mount are 3D-printed in matte black PLA.

When you want to add scale detail and accessories to your rig, simply attach the roof rack and inner magnet support to the roof of your Scout II. If you feel the urge to change up the appearance or performance of your crawler, simply pull the roof rack and support brace off, and you've got a clean slate to work with once again.

The magnet mount is strong and should withstand basic trail action and rollovers.

Two versions of this roof rack are available, one with magnets included and one without.

This product is printed on demand and may take up to 5 days to ship after you place your order.